This traditional styled loveseat will decor homes with a fresh furniture fashion that is all about classic design and sophisticated elegance. Flaunting decorative rolled arms and exposed wood accent trim, this loveseat complements its coordinating collection as well as existing traditional furniture items. Created in a two over two cushion style, this small sofa is crafted for comfort using an eco-friendly furniture foam that provides relaxation and reduces global warming emissions. Made from an environmentally friendly polyol that is derived from soy beans and castor beans, this enhanced foam requires up to 60 percent less fossil fuel resources than its petroleum-based counterparts. Complete with an elegant silhouette crafted in formal furniture fashion, this traditional loveseat makes a decorative living room addition.

The 7400 Classic Styled Loveseat with Traditional Wood Face Accent, made by Serta Upholstery by Hughes Furniture, is brought to you by Rooms for Less. Rooms for Less is a local furniture store, serving the Columbus, Reynoldsburg, Upper Arlington, Westerville Ohio area. Product availability may vary. Contact us for the most current availability on this product.

Decorative Rolled Arm with Traditional Wood Face Accent
Exposed Wood Leg with Decorative Carved Design
Plush Upholstered Seat Back Cushioned in Two Over Two Style
Plush Upholstered Seat Cushions in Two Over Two Style

Specifications

Style Elements
Arm Description	Decorative Rolled Arm with Traditional Wood Face Accent
Leg / Base Type	Exposed Wood Leg
Leg or Base Description	Exposed Wood Leg with Decorative Carved Design
Design Style	Traditional
Fabric Options	Available as Shown in Brown Cord Torrey Fabric
Optional Upholstery Features	Exposed Wood
Seat Back Description	Plush Upholstered Seat Back Cushioned in Two Over Two Style
Seat Description	Plush Upholstered Seat Cushions in Two Over Two Style
Arm Type - Upholstered	Rolled Arm
Dimensions
Depth (front to back)	37" D
Width (side to side)	71" W
Height (bottom to top)	37" H
Construction & Materials
Seat Support	Springs are machine tested for durability and lasting support. A sturdy frame provides an anchor for good seating support, while the filling or cushion, augments it. In frames, 8 gauge no-sag wide loop sinuous springs are “s” shaped and run from the front of the seat to the back. An additional 16-gauge stakewire is attached across from side to side to support these springs. This process is done by pneumatically clamping the springs together to tie the individual springs into one unit to prevent the springs from separating or twisting. Back spring clips are autolocking and are made from nylon to help reduce noise. Back springs are 12-gauge sinuous wire. Seat spring clips are constructed from metal to provide strength and are nylon-lined, reducing noise. This makes for a strong seat and provides superior support.
Frame Construction	Frames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Padding & Ergonomics	Seat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency. Backs and pillows are air-blown with polyurethane foam or polyester fiber to contour to the body for maximum support and comfort.
Tailoring	Fabrics are cut and sewn in each of this manufacturer’s plants. This allows greater flexibility in scheduling and helps monitor quality. One-half inch seams are used and components are sewn together at a minimum of 5 1/2 to 6 seams per inch.
Item & Dimensions
Manufacturer	Serta Upholstery by Hughes Furniture

Similar search terms: Loveseat, Love Seats, Reclining Love Seat, Sofa Love Seat, Loveseat Recliner, Love Seat Sleepers, Loveseat Glider, Small Love Seat, Love Seat Hide-A-Bed, Love Seat Chaise, Modular Sectional Pieces, Couch, Small Couch, Sofa, Small Sofa, Settee, Divan, Davenport, Couches, Seating for Two, Double Chair, Settee for Two People

Reference #: 7400NFRLS