This transitional cuddle chair brings a blend of sophistication and modern appeal to your living room. The mixing of these two styles create a look that matches most any design aesthetic from classic casual to refined contemporary. Its reversible cushions allow you to flip and rotate, increasing the longevity of this cozy cuddle chair.
The 14100 Transitional Cuddle Chair with Block Feet by Serta Upholstery by Hughes Furniture
at Rooms for Less in the Columbus, Reynoldsburg, Upper Arlington, Westerville Ohio area. Product availability may vary.
Contact us for the most current availability on this product.
Exposed Wood Leg
Item & Dimensions
Serta Upholstery by Hughes Furniture
Width (side to side)
Depth (front to back)
Height (bottom to top)
Construction & Warranty
Frames are built in-house with hardwood, such as oak, ash, birch, or maple (70%) and plywood or OSB (30%). Lumber is cut and graded in Manufacturers own machine room to help insure quality for the foundation of our recliners. Only hardwood lumber is used, never plywood or OSB in stress points or load-bearing areas of frames. Individual frame pieces are reinforced in the corners and stress points by glue, blocks and staples, much more preferable than nails or screws.
Padding & Ergonomics
Seat cushions and frame parts are fabricated in manufacturer’s own foam fabrication facilities to control the quality and feel of each piece. Cushion thickness is kept at a minimum of 4.5 inches to promote comfort and support. Cushions are fabricated from superior (1.8 lb. density, 34-lb. compression) foam and wrapped in 1oz. or 1.8 oz Dacron for comfort and protection. All foams are made with Environmentally-friendly Polyol derived from soy beans and castor beans that require up to 60% less fossil fuel resources than petroleum-based polyols (for every 11 pounds of plant-based polyol, a gallon of crude oil is saved. This results in 36% less global warming emissions). Test results are monitored from every shipment, every day to maintain consistency.